 | "Electrical Ecology" LLC
St. Petersburg, Russia |  Ru |  Es |
|
| |
|
| Model |
Perform. (air), m3/h |
Aerodyn. drag, Pa |
Electrical power cons., kW |
Catalyst volume, m3 |
Contamin. concentr., mg/m3 |
Unit weight, kg |
Notes |
| Pilot air cleaner PLAZKAT PU |
Up to 0,1 |
Up to 1000 |
0,5 (220V, 50Hz) |
0,02 |
|
20 |
Portable air cleaner. It is used for carrying out tests of exhaust gases from contaminant substances in different areas of industry. |
| PLAZKAT 1-5G |
1 to 5 |
500 to 900 |
1 to 15 (380V, 50 Hz) |
0,15 to 0,50 |
Up to 600 |
300 to 800 |
These models are characterized by small sizes; they may be installed in the shops close to the source of emission for the purpose of generating a closed air treatment circuit. Areas of application: plastic and polymer manufacturing plants, pharmaceutical industry and other facilities in case air purification from organic substances, such as styrol, phenol, formaldehyde, acetic acid, ethanol, chloroform and acetone is required. |
| PLAZKAT 1-5PG |
1 to 5 |
600 to 800 |
4 to 15 (380V, 50 Hz) |
0,2 to 1,0 |
Up to 1000 |
400 to 1500 |
The model is designed for cleaning vapor-laden gaseous emissions of the food industry, breweries and perfumeries from stench of the gaseous substances, such as, acetaldehyde, acetone, ethanol, isopropyl alcohol, acetic acid, acrolein, fatty acids and other hydrocarbons. This model of gas cleaner should be used in line with heat exchangers of different designs to provide vapor separation of vapor-laden emissions. |
| PLAZKAT 3-7G |
3 to 7 |
Up to1000 |
1-5 (380V, 50 Hz) |
0,1-0,25 |
|
500 |
This model is used for elimination of organic compositions present in minor concentrations (methanol, dibutyl phthalate, polyvinyl alcohol) |
| PLAZKAT 5-15G |
5 to 15 |
500 to 900 |
1 to 25 (380V, 50 Hz) |
0,15 to 0,50 |
Up to 1500 |
300 to 800 |
This model is used for purification of air vented by chemical, petrochemical plants and other industries from hazardous and stinking gaseous substances: ammonia, hydrogen sulphide, mercaptans and other organic compositions. |
| PLAZKAT 15-30G |
15 to 30 |
500 to 900 |
1 to 30 (380V, 50 Hz) |
0,15 to 1,0 |
Up to 2000 |
300 to 1200 |
This "PLAZKAT" version is used for purification of air discharged by the process equipment of the ferrous metallurgy plants from gaseous contaminants (nitric and carbon oxide). |
| PLAZKAT 30-50G |
30 to 50 |
700 to1200 |
6 to 60 (380V, 50 Hz) |
1 to 5 |
Up to 4000 |
1500 to 6500 |
This "PLAZKAT" version is used for purification of air discharged by the process equipment of the plywood, chipboard, fiberboard and sandwich laminates manufacturing plants from gaseous contaminants (formaldehyde, phenol, ethanol and etc.), in particular in the shops where impregnation of plastics with resins, lacquers, compounds is effected, as well as in other shops. These units may be installed in the closed air circulation systems for the purification and cost effective heat carriers’ consumption in the cold season. |
| Residual ozone neutralizer |
5 to 7 |
|
Up to 25 (380V, 50 Hz) |
|
Ozone, 10-50 |
1500-2000 |
This unit is designed for elimination of residual ozone, dangerous for service personnel. |
| General features: |
| Inlet gas temperature, °C |
Inlet dust concentration, mg/m3 |
Purification degree of exhausts, % (depending on the type and concentration of the contaminant substances) |
| 20 to 80 |
Up to 3 – 5 |
85-99 |
|
